#
# For a description of the syntax of this configuration file,
# see the Configure script.
#

mainmenu_name "Linux Kernel Configuration"

define_bool CONFIG_PARISC y
define_bool CONFIG_UID16 n
define_bool CONFIG_RWSEM_GENERIC_SPINLOCK y
define_bool CONFIG_RWSEM_XCHGADD_ALGORITHM n

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ] ; then
  bool 'Set version information on all module symbols' CONFIG_MODVERSIONS
  bool 'Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'Processor type'
choice 'Processor family' \
	"PA7000/PA7100		CONFIG_PA7100 \
	 PA7200			CONFIG_PA7200 \
	 PA7100LC/PA7300LC	CONFIG_PA7100LC \
	 PA8x00			CONFIG_PA8X00" PA7000

if [ "$CONFIG_PA8X00" = "y" ] ; then
   define_bool CONFIG_PA20 y
   bool '64-bit kernel' CONFIG_PARISC64
   dep_bool '32-bit PDC' CONFIG_PDC_NARROW $CONFIG_PARISC64
else
   define_bool CONFIG_PA11 y
fi
endmenu

mainmenu_option next_comment
comment 'General options'

bool 'Symmetric multi-processing support' CONFIG_SMP
if [ "$CONFIG_SMP" = "y" ]; then
   int  'Maximum number of CPUs (2-32)' CONFIG_NR_CPUS 32
fi

bool 'Chassis LCD and LED support' CONFIG_CHASSIS_LCD_LED

bool 'Kernel Debugger support' CONFIG_KWDB
# define_bool CONFIG_KWDB n

bool 'U2/Uturn I/O MMU' CONFIG_IOMMU_CCIO
bool 'VSC/GSC/HSC bus support' CONFIG_GSC
dep_bool '  Lasi I/O support' CONFIG_GSC_LASI $CONFIG_GSC
dep_bool '  Wax I/O support' CONFIG_GSC_WAX $CONFIG_GSC

dep_bool 'EISA support' CONFIG_EISA $CONFIG_GSC
define_bool CONFIG_ISA $CONFIG_EISA
bool 'PCI support' CONFIG_PCI

if [ "$CONFIG_PCI" = "y" ]; then
   dep_bool '  GSCtoPCI/Dino PCI support' CONFIG_GSC_DINO $CONFIG_GSC
   bool '  LBA/Elroy PCI support' CONFIG_PCI_LBA
   define_bool CONFIG_IOSAPIC $CONFIG_PCI_LBA
   define_bool CONFIG_IOMMU_SBA $CONFIG_PCI_LBA

#   bool '  EPIC PCI support' CONFIG_PCI_EPIC n
   bool '  SuperIO support' CONFIG_SUPERIO
fi 

source drivers/pci/Config.in

endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG

bool 'Networking support' CONFIG_NET

bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
define_bool CONFIG_KCORE_ELF y
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for SOM binaries' CONFIG_BINFMT_SOM
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

# anyone want to get ACPI working on PA/RISC?
define_bool CONFIG_PM n

endmenu

source drivers/parport/Config.in

source drivers/block/Config.in

source drivers/md/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

if [ "$CONFIG_SUPERIO" = "y" ]; then
    mainmenu_option next_comment
    comment 'ATA/IDE/MFM/RLL support'

    tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

    if [ "$CONFIG_IDE" != "n" ]; then
      source drivers/ide/Config.in
    else
      define_bool CONFIG_BLK_DEV_HD n
    fi
    endmenu
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
   source drivers/scsi/Config.in
fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then
   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES

   if [ "$CONFIG_NETDEVICES" = "y" ]; then
      source drivers/net/Config.in
      if [ "$CONFIG_ATM" = "y" -o "$CONFIG_ATM" = "m" ]; then
         source drivers/atm/Config.in
      fi
   fi
   endmenu
fi

#
# input before char - char/joystick depends on it. As does USB.
#
source drivers/input/Config.in
source drivers/char/Config.in
source drivers/hil/Config.in

source drivers/media/Config.in

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment
   comment 'Console drivers'
   source drivers/video/Config.in

   bool 'STI console' CONFIG_STI_CONSOLE
   if [ "$CONFIG_GSC_PS2" = "y" ]; then
      define_bool CONFIG_DUMMY_CONSOLE y
   fi
   if [ "$CONFIG_STI_CONSOLE" = "y" ]; then
      define_bool CONFIG_DUMMY_CONSOLE y
      define_bool CONFIG_FBCON y
      define_bool CONFIG_FBCON_FONT y
#      define_bool CONFIG_FBCON_FONTWIDTH8_ONLY n
      define_bool CONFIG_FONT_8x8 y
      define_bool CONFIG_FONT_8x16 y
      define_bool CONFIG_FONT_6x11 y
      define_bool CONFIG_FONT_SUN12x22 y
   fi
   endmenu
fi

mainmenu_option next_comment
comment 'Sound'

tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
   source drivers/sound/Config.in
fi
endmenu

if [ "$CONFIG_SUPERIO" = "y" ]; then
    source drivers/usb/Config.in
fi

mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ

int 'Kernel messages buffer length shift (0 = default)' CONFIG_LOG_BUF_SHIFT 0

endmenu

source crypto/Config.in
source lib/Config.in
